MIABIS on FHIR Implementation Guide
1.0.0 - CI Build

MIABIS on FHIR Implementation Guide - Local Development build (v1.0.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: Network - Detailed Descriptions

Active as of 2025-05-15

Definitions for the miabis-network resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Group
Definition

Represents a defined collection of entities that may be discussed or acted upon collectively but which are not expected to act collectively, and are not formally or legally recognized; i.e. a collection of entities that isn't an Organization.

ShortGroup of multiple entities
Comments

If both Group.characteristic and Group.member are present, then the members are the individuals who were found who met the characteristic. It's possible that there might be other candidate members who meet the characteristic and aren't (yet) in the list. All members SHALL have the listed characteristics.

Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
grp-1: Can only have members if group is "actual" (member.empty() or (actual = true))
grp-1: Can only have members if group is "actual" (member.empty() or (actual = true))
2. Group.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Group.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Group.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Group.extension:MemberEntity
    Slice NameMemberEntity
    Definition

    Optional Extension Element - found in all resources.

    ShortOptional Extensions Element
    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(Extension Definition for Group.member.entity for Version 5.0) (Extension Type: Reference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson, Specimen))
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Group.extension:MemberEntity.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..0*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Group.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 10. Group.extension:MemberEntity.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-Group.member.entity
      12. Group.extension:MemberEntity.value[x]
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control10..1
      TypeReference(Network, Biobank), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Group.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. Group.identifier
      Definition

      A unique business identifier for this group.

      ShortID of the collection.Unique id
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control10..1*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows the group to be referenced from external specifications.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Group.active
      Definition

      Indicates whether the record for the group is available for use or is merely being retained for historical purposes.

      ShortThe state of the collection functions.Whether this group's record is in active use
      Control0..1
      Typeboolean
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to be able to mark a group record as not to be used because it was created in error or is otherwise no longer available (e.g. a herd that no longer exists).

      Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Group.type
      Definition

      Identifies the broad classification of the kind of resources the group includes.

      ShortThe type of resources this group contains. For this resource type, this is always set to person. (should be organization, but this is only supported in R5)person | animal | practitioner | device | medication | substance
      Comments

      Group members SHALL be of the appropriate resource type (Patient for person or animal; or Practitioner, Device, Medication or Substance for the other types.).

      Control1..1
      BindingThe codes SHALL be taken from GroupTypehttp://hl7.org/fhir/ValueSet/group-type|4.0.1
      (required to http://hl7.org/fhir/ValueSet/group-type|4.0.1)

      Types of resources that are part of group.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Identifies what type of resources the group is made up of.

      Pattern Valueperson
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Group.actual
      Definition

      If true, indicates that the resource refers to a specific group of real individuals. If false, the group defines a set of intended individuals.

      ShortDescriptive or actual
      Control1..1
      This element is affected by the following invariants: grp-1
      Typeboolean
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      There are use-cases for groups that define specific collections of individuals, and other groups that define "types" of intended individuals. The requirements for both kinds of groups are similar, so we use a single resource, distinguished by this flag.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Group.name
      Definition

      A label assigned to the group for human identification and communication.

      ShortName of the collection (preferably in English).Label for Group
      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Used to identify the group in human communication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Group.managingEntity
      Definition

      Entity responsible for defining and maintaining Group characteristics and/or registered members.

      ShortEntity that is the custodian of the Group's definition
      Comments

      This does not strictly align with ownership of a herd or flock, but may suffice to represent that relationship in simple cases. More complex cases will require an extension.

      Control10..1
      TypeReference(Network Organization, Organization, RelatedPerson, Practitioner, PractitionerRole)
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Group
      2. Group.extension
      SlicingThis element introduces a set of slices on Group.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 4. Group.extension:MemberEntity
        Slice NameMemberEntity
        Control0..*
        TypeExtension(Extension Definition for Group.member.entity for Version 5.0) (Extension Type: Reference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson, Specimen))
        Must Supporttrue
        6. Group.extension:MemberEntity.value[x]
        TypeReference(Network, Biobank)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        8. Group.identifier
        ShortID of the collection.
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control1..1
        Must Supporttrue
        10. Group.active
        ShortThe state of the collection functions.
        Must Supporttrue
        12. Group.type
        ShortThe type of resources this group contains. For this resource type, this is always set to person. (should be organization, but this is only supported in R5)
        Pattern Valueperson
        14. Group.name
        ShortName of the collection (preferably in English).
        Control1..?
        Must Supporttrue
        16. Group.managingEntity
        Control1..?
        TypeReference(Network Organization)
        Must Supporttrue

        Guidance on how to interpret the contents of this table can be found here

        0. Group
        Definition

        Represents a defined collection of entities that may be discussed or acted upon collectively but which are not expected to act collectively, and are not formally or legally recognized; i.e. a collection of entities that isn't an Organization.

        ShortGroup of multiple entities
        Comments

        If both Group.characteristic and Group.member are present, then the members are the individuals who were found who met the characteristic. It's possible that there might be other candidate members who meet the characteristic and aren't (yet) in the list. All members SHALL have the listed characteristics.

        Control0..*
        Is Modifierfalse
        Summaryfalse
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        grp-1: Can only have members if group is "actual" (member.empty() or (actual = true))
        2. Group.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Is Modifierfalse
        Summarytrue
        4. Group.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. Group.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. Group.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. Group.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. Group.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        14. Group.extension
        Definition

        An Extension

        ShortExtension
        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Group.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 16. Group.extension:MemberEntity
          Slice NameMemberEntity
          Definition

          Optional Extension Element - found in all resources.

          ShortOptional Extensions Element
          Control0..*
          This element is affected by the following invariants: ele-1
          TypeExtension(Extension Definition for Group.member.entity for Version 5.0) (Extension Type: Reference(CareTeam, Device, Group, HealthcareService, Location, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson, Specimen))
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. Group.extension:MemberEntity.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          20. Group.extension:MemberEntity.extension
          Definition

          An Extension

          ShortExtension
          Control0..0
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Group.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 22. Group.extension:MemberEntity.url
            Definition

            Source of the definition for the extension code - a logical name or a URL.

            Shortidentifies the meaning of the extension
            Comments

            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

            Control1..1
            Typeuri
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-Group.member.entity
            24. Group.extension:MemberEntity.value[x]
            Definition

            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

            ShortValue of extension
            Control1..1
            TypeReference(Network, Biobank)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. Group.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Summaryfalse
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            28. Group.identifier
            Definition

            A unique business identifier for this group.

            ShortID of the collection.
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control1..1
            TypeIdentifier
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Allows the group to be referenced from external specifications.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. Group.active
            Definition

            Indicates whether the record for the group is available for use or is merely being retained for historical purposes.

            ShortThe state of the collection functions.
            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Need to be able to mark a group record as not to be used because it was created in error or is otherwise no longer available (e.g. a herd that no longer exists).

            Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            32. Group.type
            Definition

            Identifies the broad classification of the kind of resources the group includes.

            ShortThe type of resources this group contains. For this resource type, this is always set to person. (should be organization, but this is only supported in R5)
            Comments

            Group members SHALL be of the appropriate resource type (Patient for person or animal; or Practitioner, Device, Medication or Substance for the other types.).

            Control1..1
            BindingThe codes SHALL be taken from GroupType
            (required to http://hl7.org/fhir/ValueSet/group-type|4.0.1)

            Types of resources that are part of group.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Identifies what type of resources the group is made up of.

            Pattern Valueperson
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            34. Group.actual
            Definition

            If true, indicates that the resource refers to a specific group of real individuals. If false, the group defines a set of intended individuals.

            ShortDescriptive or actual
            Control1..1
            This element is affected by the following invariants: grp-1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            There are use-cases for groups that define specific collections of individuals, and other groups that define "types" of intended individuals. The requirements for both kinds of groups are similar, so we use a single resource, distinguished by this flag.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            36. Group.code
            Definition

            Provides a specific type of resource the group includes; e.g. "cow", "syringe", etc.

            ShortKind of Group members
            Comments

            This would generally be omitted for Person resources.

            Control0..1
            Binding

            Kind of particular resource; e.g. cow, syringe, lake, etc.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            38. Group.name
            Definition

            A label assigned to the group for human identification and communication.

            ShortName of the collection (preferably in English).
            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Used to identify the group in human communication.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            40. Group.quantity
            Definition

            A count of the number of resource instances that are part of the group.

            ShortNumber of members
            Comments

            Note that the quantity may be less than the number of members if some of the members are not active.

            Control0..1
            TypeunsignedInt
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Group size is a common defining characteristic.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            42. Group.managingEntity
            Definition

            Entity responsible for defining and maintaining Group characteristics and/or registered members.

            ShortEntity that is the custodian of the Group's definition
            Comments

            This does not strictly align with ownership of a herd or flock, but may suffice to represent that relationship in simple cases. More complex cases will require an extension.

            Control1..1
            TypeReference(Network Organization)
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            44. Group.characteristic
            Definition

            Identifies traits whose presence r absence is shared by members of the group.

            ShortInclude / Exclude group members by Trait
            Comments

            All the identified characteristics must be true for an entity to a member of the group.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Requirements

            Needs to be a generic mechanism for identifying what individuals can be part of a group.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            46. Group.characteristic.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            48. Group.characteristic.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            50. Group.characteristic.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            52. Group.characteristic.code
            Definition

            A code that identifies the kind of trait being asserted.

            ShortKind of characteristic
            Control1..1
            Binding

            List of characteristics used to describe group members; e.g. gender, age, owner, location, etc.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Requirements

            Need a formal way of identifying the characteristic being described.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. Group.characteristic.value[x]
            Definition

            The value of the trait that holds (or does not hold - see 'exclude') for members of the group.

            ShortValue held by characteristic
            Comments

            For Range, it means members of the group have a value that falls somewhere within the specified range.

            Control1..1
            Binding

            Value of descriptive member characteristic; e.g. red, male, pneumonia, Caucasian, etc.

            TypeChoice of: CodeableConcept, boolean, Quantity, Range, Reference
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Requirements

            The value of the characteristic is what determines group membership.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. Group.characteristic.exclude
            Definition

            If true, indicates the characteristic is one that is NOT held by members of the group.

            ShortGroup includes or excludes
            Comments

            This is labeled as "Is Modifier" because applications cannot wrongly include excluded members as included or vice versa.

            Control1..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Requirements

            Sometimes group membership is determined by characteristics not possessed.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            58. Group.characteristic.period
            Definition

            The period over which the characteristic is tested; e.g. the patient had an operation during the month of June.

            ShortPeriod over which characteristic is tested
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            60. Group.member
            Definition

            Identifies the resource instances that are members of the group.

            ShortWho or what is in group
            Control0..*
            This element is affected by the following invariants: grp-1
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Requirements

            Often the only thing of interest about a group is "who's in it".

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. Group.member.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            64. Group.member.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            66. Group.member.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            68. Group.member.entity
            Definition

            A reference to the entity that is a member of the group. Must be consistent with Group.type. If the entity is another group, then the type must be the same.

            ShortReference to the group member
            Control1..1
            TypeReference(Patient, Practitioner, PractitionerRole, Device, Medication, Substance, Group)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. Group.member.period
            Definition

            The period that the member was in the group, if known.

            ShortPeriod member belonged to the group
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summaryfalse
            Requirements

            Need to track who was in a group at a particular time.

            Meaning if MissingThe member is in the group at this time
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            72. Group.member.inactive
            Definition

            A flag to indicate that the member is no longer in the group, but previously may have been a member.

            ShortIf member is no longer in group
            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Requirements

            Sometimes you don't know when someone stopped being in a group, but not when.

            Meaning if MissingMembers are considered active unless explicitly specified otherwise
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))